SAAB WIS ONLINE

Radio and Navigation Antenna Cable Replacement

Radio and Navigation Antenna Cable Replacement



Callout Component Name

Preliminary Procedures

Lower the headlining trim panel where needed. Refer to Headlining Trim Panel Replacement (With C3U) Headlining Trim Panel Replacement (Without C3U) .
1 Radio Antenna Cable Extension Cable

Procedure

1. Disconnect the electrical connectors at each end of the antenna.

2. If the antenna cable is taped into the wiring harness then cut the ends off the old antenna and route the new antenna as close to the old one as possible using tie straps to secure the new cable.