Keyless Entry Control Module Programming and Setup
|
Keyless Entry Control Module Programming and Setup
|
Special Tools
EL-49642
SPS Programming Support Tool
For equivalent regional tools, refer to
Special Tools
.
Replace and Program ECU or Reprogram ECU
|
To program a replacement or an existing ECU, perform the following procedure:
1.
|
Install
EL-49642
SPS programming support tool.
|
2.
|
Access the Service Programming System (SPS) and follow the on-screen instructions.
|
3.
|
On the SPS Supported Controllers screen, select Keyless Entry Control Module - Programming and follow the on-screen instructions.
|
4.
|
At the end of programming, choose the "Clear All DTCs" function on the SPS screen.
|