Theft Deterrent Module Programming and Setup

/ 9-4x / 2011 / 3. Electrical System / Bus and diagnostics communication / Adjustment/replacement / Theft Deterrent Module Programming and Setup

Diagnostic Aids

The theft deterrent module only functions as an exciter and antenna, energizing the key transponder and receiving the key code information. The immobilizer software is contained wholly in the body control module (BCM).

Replace and Program ECU or Reprogram ECU

This ECU does not require SPS programming or any setup procedures.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.