SAAB WIS ONLINE

Communication Interface Module Scan Tool Information

Communication Interface Module Scan Tool Information

Telematic Control Module, Scan Tool Data Parameters

Parameter System State Expected Value Description
Operating conditions: Ignition ON
GPS Data
Calibration status - Calibrated or NOT calibrated Indicates calibration status
Calibration method for position - Varies Indicates the method used to determine position. (0) GPS, (1) Wheel speed only, (2) Wheel speed and GPS combined, (3) Gyro only, (4) Gyro and GPS combined, (5) No fix
Month - MM Shows the current month.
Day - DD Shows the current day.
Year - YY Shows the current year.
Hour - HH Shows GPS hour (24-hour format - GMT).
Minute - MM Shows GPS minute.
Second - SS Shows GPS second.
GPS signal - Varies The scan tool shows YES or NO. YES indicates that the telematic control module receives a GPS signal.
Signal Strength Data
Receiver ID number - Varies The scan tool displays a 2-5 digit value. This is the receiver's ID number.
GSM signal strength - Varies The scan tool displays 0-127. This is the signal strength of the telematic control module.
Signal Type - Digital Shows the signal type received by the telematic control module.
Bluetooth Data
Bluetooth - Active Indicates whether Bluetooth is activated or deactivated.
Bluetooth link status - Varies Shows the current link status. (0) Not connected, (1) Connected/standby, (2) Call active, (3) 3-way call active
Bluetooth link quality - Varies The scan tool displays a decimal value between 0 and 255.
Bluetooth phone to telematic control module; authorisation status - Activated or Deactivated Shows Bluetooth phone to telematic control module authorisation status
Bluetooth phone to telematic control module; communication status - Activated or Deactivated Shows Bluetooth phone communication status with telematic control module
Bluetooth phone, voice activation - Activated or Deactivated Shows the status the Bluetooth phone's voice activation.


Telematic Control Module, Scan Tool Output Signals

Output Data Description
B1000 Information This shows the data recorded when DTC B1000 was set in the telematic control module.
Green LED The telematics communication interface control module illuminates the green LED when ON is selected.
Phone Call Test When ON is selected, the telematics communication interface control module commands OnStar to connect to the OnStar Centre.
Red LED The telematics communication interface control module illuminates the red LED when ON is selected.
PRL Update The telematic control module performs a preferred roaming list (PRL) update when this is selected.
Reset of vehicle speed limitation Resets the speed limitation function.