SAAB WIS ONLINE

Electronic Suspension Control Module Scan Tool Information

Electronic Suspension Control Module Scan Tool Information


The electronic suspension control module scan tool data parameters list contains all suspension control related parameters that are available on the scan tool. The list is arranged in alphabetical order. A given parameter may appear in any one of the data lists.

Electronic Suspension Control Module Scan Tool Data Parameters

Parameter System State Expected Value Description
Operating Conditions: Ignition ON
Battery Voltage - 11-14 V The scan tool displays V. This is the current battery voltage.
Front Steering Position Sensor Circuit - varies The scan tool displays degrees. This is the current rotational position of the steering wheel.
Left Front Damper Actuator Command - varies The scan tool displays mA. This is the current applied to the left front damper actuator.
Left Front Vertical Body Acceleration - 0 m/s 2 The scan tool displays m/s 2 . This is the signal from the left front body acceleration sensor.
Left Front Vertical Wheel Acceleration - 0 m/s 2 The scan tool displays m/s 2 . This is the signal from the left front wheel acceleration sensor.
Left Rear Damper Actuator Command - varies The scan tool displays mA. This is the current applied to the left rear damper actuator.
Rear Vertical Body Acceleration - 0 m/s 2 The scan tool displays m/s 2 . This is the signal from the rear body acceleration sensor.
Right Front Damper Actuator Command - varies The scan tool displays mA. This is the current applied to the right front damper actuator.
Right Front Vertical Body Acceleration - 0 m/s 2 The scan tool displays m/s 2 . This is the signal from the right front body acceleration sensor.
Right Front Vertical Wheel Acceleration - 0 m/s 2 The scan tool displays m/s 2 . This is the signal from the right front wheel acceleration sensor.
Right Rear Damper Actuator Command - varies The scan tool displays mA. This is the current applied to the right rear damper actuator.
Suspension Position Sensor 5 V Reference - 4.8-5.2 V The scan tool displays V. This is the wheel and body acceleration sensors supply voltage.
Suspension System Mode - Normal The scan tool displays Normal, Comfort or Sport Mode depending on the selected mode.
Tour mode switch pressed Comfort
Sport mode switch pressed Sport Mode
Vehicle Speed - 0 km/h (0 MPH) The scan tool displays km/h (MPH) depending on the current speed of the vehicle.



Electronic Suspension Control Module Scan Tool Output Controls

Output Control Description
Left Front Damper Actuator Commands the current applied to the left front damper actuator Increase or Decrease.
Left Rear Damper Actuator Commands the current applied to the left rear damper actuator Increase or Decrease.
Right Front Damper Actuator Commands the current applied to the right front damper actuator Increase or Decrease.
Right Rear Damper Actuator Commands the current applied to the right rear damper actuator Increase or Decrease.