SAAB WIS ONLINE

Generator Replacement (LAU)

Generator Replacement (LAU)

Removal Procedure


1. Disconnect the negative battery cable. Refer to Battery negative cable disconnection and connection .


2. Remove the drive belt. Refer to Drive Belt Replacement .

3. Reposition the positive battery cable boot at the generator terminal.

4. Disconnect the engine harness electrical connector (1) from the generator.

5. Remove the positive battery cable nut (3) at the generator.

6. Remove the positive battery cable terminal (4) from the generator.

7. Remove the idler pulley bolt (1) and idler pulley (2). Refer to Drive Belt Idler Pulley Replacement .


8. Remove the generator bolts (3).

9.
Note

When removing the generator from the vehicle, it may be necessary to maneuver the generator to remove it from the vehicle.


Remove the generator (4).


Installation Procedure


1. Position the generator (4) to the engine.


2. Loosely install the generator bolts (3).

3. Install the idler pulley. Refer to Drive Belt Idler Pulley Replacement .

4. Refer to Fastener Caution .

Tighten the generator bolts (3) in the sequence shown to 58 Nm (43 lb ft) .

5. Install the drive belt. Refer to Drive Belt Replacement .


6. Connect the engine harness electrical connecto (1) to the generator.

7. Install the positive battery cable terminal (4) to the generator.

8. Install the positive battery cable nut (3) at the generator and tighten to 15 Nm (11 lb ft) .

9. Position the positive battery cable boot at the generator terminal.

10. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .