SAAB WIS ONLINE

Backup and Rear Fog Lamp Replacement

Backup and Rear Fog Lamp Replacement



Callout Component Name

Preliminary Procedures

1.
Warning

When working with any type of glass or sheet metal with exposed or rough edges, wear approved safety glasses and gloves in order to reduce the chance of personal injury.


Open and support the rear liftgate assembly.

2. Remove the liftgate lower trim finish panel. Refer to Liftgate Lower Trim Finish Panel Replacement .


1 Back Up and Rear Fog Lamp Nut (Qty: 2)
Warning

When working with any type of glass or sheet metal with exposed or rough edges, wear approved safety glasses and gloves in order to reduce the chance of personal injury.


Refer to Fastener Caution .

Tighten

4 Nm (35 lb in)

Procedure

Remove both lower and upper brackets from inside the liftgate lamp assembly.
2 Back Up and Rear Fog Lamp Assembly

Procedure

1. Carefully push the lamp assembly outward away from the liftgate lower outer panel.

2. Disconnect the electrical harness connector prior to removing the lamp assembly from the liftgate outer panel.

3. Transfer the back up lamp socket harness as needed.