SAAB WIS ONLINE

Brake Pedal Position Sensor Replacement

Brake Pedal Position Sensor Replacement



Callout Component Name

Preliminary Procedures

Remove the instrument panel insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side .
1 Brake Pedal Position Sensor Bolt Refer to Fastener Caution .

Procedure

Remove the sensor bolt.

Tighten

9 N m (80 lb in)
2 Brake Pedal Position Sensor

Procedure

1. Disconnect the electrical connector.

2. Pull the sensor away from the bracket.

3. Recalibrate the brake pedal position sensor. Refer to Brake Pedal Position Sensor Calibration .