Daytime Running Lamp Bulb Replacement (TT6 Left Side)
|
|
Daytime Running Lamp Bulb Replacement (TT6 Left Side)
|
|
Callout
|
Component Name
|
Warning
|
|
The high intensity discharge system produces high voltage and current. To reduce the risk of severe shocks and burns:
|
|
•
|
Never open the high intensity discharge system ballast or the arc tube assembly starter.
|
|
•
|
Never probe between the high intensity discharge system ballast output connector and the arc tube assembly.
|
|
|
|
|
|
|
Warning
|
|
The high intensity discharge system produces high voltage and current. In order to reduce the risk of severe shocks and burns, the battery negative cable must be disconnected any time service work is being performed on or around the high intensity discharge system.
|
|
|
|
|
|
Preliminary Procedures
|
1.
|
Open and support the hood assembly.
|
|
2.
|
Remove the accessory bulb cover.
|
|
|
1
|
Refer to
Halogen Bulb Warning
.
Daytime Running Lamp Bulb
Procedure
|
1.
|
Disconnect the electrical connector from the daytime running lamp bulb socket.
|
|
2.
|
Rotate the bulb socket counter-clockwise and remove.
|
|
