Front Turn Signal Lamp Bulb Replacement (TT6 Left Hand Bulb)
|
Front Turn Signal Lamp Bulb Replacement (TT6 Left Hand Bulb)
|
Callout
|
Component Name
|
Warning
|
The high intensity discharge system produces high voltage and current. To reduce the risk of severe shocks and burns:
|
•
|
Never open the high intensity discharge system ballast or the arc tube assembly starter.
|
•
|
Never probe between the high intensity discharge system ballast output connector and the arc tube assembly.
|
|
|
|
|
Warning
|
The high intensity discharge system produces high voltage and current. In order to reduce the risk of severe shocks and burns, the battery negative cable must be disconnected any time service work is being performed on or around the high intensity discharge system.
|
|
|
|
|
Preliminary Procedures
1.
|
Open and suitably support the hood assembly.
|
2.
|
Reposition the (ECM) Electronic Control Module if needed, for bulb access.
|
|
1
|
Front Turn Signal Lamp Bulb Socket
Procedure
Rotate the bulb electrical socket counter-clockwise in order to remove and to access the front turn signal lamp bulb.
|
2
|
Front Turn Signal Lamp Bulb
Procedure
Pull the bulb from the bulb socket.
|