SAAB WIS ONLINE

Tail Lamp Replacement

Tail Lamp Replacement



Callout Component Name

Preliminary Procedures

1. Open and support the rear liftgate assembly.

2. Remove the tail lamp access hole cover. Refer to Tail Lamp Access Hole Cover Replacement


1 Tail Lamp Screw (Qty: 2) Refer to Fastener Caution .
2 Tail Lamp Assembly

Procedure

1. Pull the tail lamp assembly rearward and disengage the two locator pins from the bodyside outer rear tail lamp panel.

2. Disconnect the electrical harness connector

3. Remove the tail lamp assembly.

4. Transfer the tail lamp bulb jumper harness and bulb sockets to the new tail lamp assembly.