SAAB WIS ONLINE

Windshield Washer Solvent Container Replacement

Windshield Washer Solvent Container Replacement



Callout Component Name

Preliminary Procedures

1. Remove the left front fender. Refer to Front Fender Replacement .

2. Remove the washer container filler tube. Refer to Windshield Washer Solvent Container Filler Tube Replacement

3. Drain the windshield washer solvent into a suitable clean container.

4. Disengage the headlamp washer nozzle hose from the headlamp washer pump hose at the front of the windshield washer solvent container.

5. Disconnect the main harness electrical connector at the front of the windshield washer solvent container.

6. Disconnect the windshield washer nozzle hose and headliner washer hose at the windshield washer pump.


1 Windshield Washer Solvent Container Bolt (Qty: 3) Refer to Fastener Caution .

Tighten

6 Nm (53 lb in)
2 Windshield Washer Solvent Container

Procedure

1. Carefully lower and remove the windshield washer solvent container from the left front inner front compartment upper side rail brackets.

2. Remove the windsheld washer solvent container hose from the container.

3. Disconnect the level sensor electrical connector.

4. Disconnect both headlamp and windshield washer pump electrical connectors.

5. Transfer the windshield washer pump container main electrical harness assembly.