Windshield Wiper Motor Replacement
|
Windshield Wiper Motor Replacement
|
Callout
|
Component Name
|
Preliminary Procedures
Remove the windshield wiper transmission frame assembly. Refer to
Windshield Wiper Transmission Replacement
.
|
1
|
Windshield Wiper Motor Bolt (Qty: 2)
Refer to
Fastener Caution
.
Tighten
8 Nm (71 lb in)
|
2
|
Windshield Wiper Motor
Procedure
1.
|
Using the
J-39232
separator or similar tool, remove the transmission drive links from the wiper motor crank arm ball stud.
|
2.
|
Using the
J-39529
installer or similar tool, install the wiper transmission drive links onto the wiper motor crank arm ball stud.
|
Note
|
Apply a small amount of grease to the inner cup on the transmission links to aid in installation.
|
Special Tools
•
|
J-39232
Wiper Linkage Separator
|
•
|
J-39529
Wiper Linkage Installer
|
For equivalent regional tools, refer to
Special Tools
.
|