Relay Replacement (Attached to Wire Harness)
|
Relay Replacement (Attached to Wire Harness)
|
2.
|
Remove any fasteners which hold the relay in place.
|
3.
|
Remove any connector position assurance (CPA) devices or secondary locks.
|
4.
|
Note
|
Use care when removing a relay in a wiring harness when the relay is secured by fasteners or tape.
|
Separate the relay (1) from the wire harness connector (2).
|
1.
|
Connect the relay (1) to the wire harness connector (2).
|
2.
|
Install any connector position assurance (CPA) devices or secondary locks.
|
3.
|
Install the relay using any fasteners or tape that originally held the relay in place.
|