FEP Connectors (Steering Gear)

/ 9-4x / 2011 / 3. Electrical System / Wiring harness and components / Fault diagnosis, general / FEP Connectors (Steering Gear)

Removal Procedure

1.	Use a small flat-bladed tool to release the locking tab on the connector.

2.	Push down the locking tab to release the connector. The small flat-bladed tool may need to be pushed down and angled back slightly to depress the locking tab. Pull on the connector body while releasing the locking tab to disconnect the connector.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.