Measuring Voltage Drop
Measuring Voltage Drop |
Special Tools
EL 39200 Digital Multimeter (DMM)For equivalent regional tools, refer to Special Tools .
Refer to Test Probe Caution .
The following procedure determines the difference in voltage potential between 2 points.
1. |
Set the Digital Multimeter (DMM) to the V (DC) position.
|
2. |
Connect the positive lead of the DMM to one point of the circuit to be tested.
|
3. |
Connect the negative lead of the DMM to the other point of the circuit.
|
4. |
Operate the circuit.
|
5. |
The DMM displays the difference in voltage between the 2 points.
|