SAAB WIS ONLINE

Control Valve Body Assembly Removal

Control Valve Body Assembly Removal

Control Valve Body Cover Removal


Control Valve Body Cover Removal

Callout Component Name
1 Control Valve Body Cover Stud M6 x 30 (Qty: 2)
2 Control Valve Body Cover Bolt M6 x 30 (Qty: 12)
3 Control Valve Body Cover
4 Control Valve Body Cover Gasket
Note

Do not re-use the valve body cover gasket.


5 Control Valve Body Cover Wiring Connector Hole Seal
Warning

Support the control solenoid valve assembly around the connector when removing the seal. Excessive pulling force can damage the internal electrical connections.


6 Shift Position Switch Connector
7 Output Speed Sensor Connector
8 Input Speed Sensor Connector


Control Solenoid (w/Body and TCM) Valve Assembly Removal


Control Solenoid (w/Body and TCM) Valve Assembly Removal

Callout Component Name
1 Control Valve Body Bolt M6 x 80 (Qty: 4)
2 Control Solenoid Valve Spring
3 Control Valve Body Bolt M6 x 65 (Qty: 2)
4 Control Valve Body Bolt M6 x 42 (Qty: 1)
5 Control Valve Body Bolt M6 x 95 (Qty: 3)
6 Control Valve Body Bolt M6 x 55 (Qty: 1)
7 Control Solenoid (w/Body and TCM) Valve Assembly
8 Control Solenoid Valve Assembly Filter Plate
Warning

Use care when removing or installing the filter plate assembly. A broken or missing retaining tab may not adequately secure the filter plate to the control solenoid valve assembly, resulting in possible damage or contamination.


Note
Discard the filter plate. It is not reusable.

Inspect the pressure switch manifold seals for damage. Replace the control valve assembly as necessary.




Control Valve Body Assembly and Output Speed Sensor Removal


Control Valve Body Assembly and Output Speed Sensor Removal

Callout Component Name
1 Control Valve Body Bolt M6 x 65 (Qty: 8)
2 Control Valve Body Bolt M6 x 55 (Qty: 2)
3 Manual Shaft Detent Assembly
4 Control Valve Body Assembly
5 A/Trans Output Speed Sensor Bolt M6 x 25
6 A/Trans Output Speed Sensor
7 1-2-3-4 Clutch Fluid Passage Seal
Note

The seal is not reusable.