SAAB WIS ONLINE

Front Differential Carrier Final Rotational Torque Measurement

Front Differential Carrier Final Rotational Torque Measurement



Callout Component Name
1 Front Differential Carrier Assembly
Warning

Low bearing pre-load will cause premature failure of the front differential drive pinion gear.


Refer to Fastener Caution .
Note
• If the turning torque is not within specifications, the transfer gear assembly and differential bearing thrust washer are incorrect and must be corrected. Refer to Front Differential Drive Pinion Gear Bearing Thrust Washer and Front Differential Bearing Washer Measurement .

• Use a dial or beam torque wrench with DT-47793 differential rotating tool to measure turning torque.

Tighten

14-22 Nm (10-16 lb ft)


Special Tools

DT-47793 Differential Rotating Tool For equivalent regional tools, refer to Special Tools .