Front Differential Carrier Preliminary Rotational Torque Measurement

/ 9-4x / 2011 / 4. Transmission / Automatic Transmission (6T70/6T75) / Adjustment/replacement / Front Differential Carrier Preliminary Rotational Torque Measurement

Callout

Component Name

Front Differential Carrier Assembly

Warning

Low bearing pre-load will cause premature failure of the front differential drive pinion gear.

Refer to Fastener Caution .

Note
•	If the turning torque is not within specifications, the transfer gear assembly and differential bearing thrust washer are incorrect and must be corrected. Refer to Front Differential Drive Pinion Gear Bearing Thrust Washer and Front Differential Bearing Washer Measurement .
•	Use a dial or beam torque wrench with DT-47793 differential rotating tool to measure turning torque.

Tighten

4-12 Nm (35-106 lb in)

DT-47793 Differential Rotating Tool For equivalent regional tools, refer to Special Tools .