SAAB WIS ONLINE

Front Differential Transfer Drive Gear Support Assembly Assemble

Front Differential Transfer Drive Gear Support Assembly Assemble

Drive Support Seal Installation


Drive Support Seal Installation

Callout Component Name
1 Front Differential Transfer Drive Gear Support Seal
Note

A NEW seal must be installed.


Special Tools

DT-46624 Support Seal Installer
For equivalent regional tools, refer to Special Tools .
2 Small Chamfer Faces Up
Warning

To avoid damaging the seal, first place DT 46624-1 with the small chamfer end facing up and leave in place for at least 60 seconds.


3 Large Chamfer Faces Up
Note

Turn DT 46624-1 which is part of DT-46624 seal installer , over with the large chamfer end facing up for 60 seconds to ensure that the seal has been properly sized.




Fluid Passage Tube Assembly


Fluid Passage Tube Assembly

Callout Component Name
1 Front Differential Transfer Drive Gear Support Fluid Passage Tube Gasket
2 Fluid Passage Tube Assembly
3 Front Differential Transfer Drive Gear Fluid Passage Tube Bolt M6 x 15 (Qty: 2) Refer to Fastener Caution .

Tighten

12 Nm (106 lb in)
4 Front Differential Transfer Drive Gear Fluid Passage Tube Bolt M5 x 12 (Qty: 2)

Tighten

7 Nm (62 lb in)


Seal Installation


Seal Installation

Callout Component Name
1 Front Differential Transfer Drive Gear Support Seal
Warning
Ensure staking does not line up with lubrication holes or the holes may be damaged.

Stop driving the seal once it bottoms out to avoid seal damage.


Note

The fluid seal assembly must be staked in place using DT-49131 seal staking tool to ensure proper seal retention.



Special Tools

DT-46627-A Seal Installer

DT-49131 Seal Staking Tool


For equivalent regional tools, refer to Special Tools .
2 Front Differential Transfer Drive Gear Support Torque Converter Fluid Seal Assembly