Manual Shift Detent Lever with Shaft Position Switch Assembly and Park Pawl Actuator Removal
|
Manual Shift Detent Lever with Shaft Position Switch Assembly and Park Pawl Actuator Removal
|
Callout
|
Component Name
|
1
|
Park Pawl Actuator Bracket Bolt M6 x 25 (Qty: 2)
|
2
|
Park Pawl Actuator Bracket
|
3
|
Park Pawl Shaft
|
4
|
Park Pawl
|
5
|
Park Pawl Spring
|
6
|
Park Pawl Actuator Guide Pin
|
7
|
Park Pawl Actuator Guide
|
8
|
Manual Shift Detent Lever Pin
Note
|
•
|
Use a small nail puller or other suitable tool.
|
•
|
Discard the pin. The pin is not reusable.
|
Special Tools
•
|
DT-23129
Universal Seal Remover
|
•
|
GE 6125-1B
Slide Hammer with Adapter
|
For equivalent regional tools, refer to
Special Tools
.
|
9
|
Manual Shaft Detent (w/Shift Position Switch) Lever Assembly
Note
|
Rotate the assembly counterclockwise so the actuator rod will fit through the case opening.
|
|
10
|
Park Pawl Actuator Assembly
|