SAAB WIS ONLINE

Range Selector Lever Cable Replacement

Range Selector Lever Cable Replacement

Removal Procedure


1. Set the park brake and chock the wheels.

2. Disconnect the transmission range selector lever cable terminal (1) from the transmission manual shift lever pin (6).


3. Slide the retainer (4) rearward to release the transmission range selector lever cable from the bracket.

4. Remove the front floor console extension. Refer to Front Floor Console Extension Replacement .

5. Disconnect the transmission range selector lever cable retainers (2) from the support bracket.


6. Remove the grommet (1) and cable assembly from the floor panel.

7. Slide the transmission range selector lever cable retainer forward (1) and remove the transmission range selector cable from the transmission control base.


8. Disconnect the transmission range selector lever cable terminal (2) from the shift lever pin.

9. Remove the transmission range selector lever cable from the vehicle.


Installation Procedure


1. Install the transmission range selector lever cable in the vehicle.

2. Connect the transmission range selector lever cable terminal (2) to the shift lever pin.


3. Install the transmission range selector cable to the transmission control base, then slide the transmission range selector lever cable retainer rearward (1) to lock the cable in place.

4.
Note

Ensure the grommet is properly oriented with paint dot facing top.


Install the grommet (1) and cable assembly into the floor panel.


5. Connect the transmission range selector lever cable retainers (2) to the support bracket.

6. Install the front floor console extension. Refer to Front Floor Console Extension Replacement .

7. Connect the transmission range selector lever cable terminal (1) to the transmission manual shift lever pin (6).


8. Install the cable in the bracket, then slide the retainer (4) forward to lock the transmission range selector lever cable in the bracket.

9. Adjust the cable. Refer to Range Selector Lever Cable Adjustment .