SAAB WIS ONLINE

Torque Converter and Differential Housing Assembly Assemble

Torque Converter and Differential Housing Assembly Assemble

Pump Assembly Installation


Pump Assembly Installation

Callout Component Name
1 Drive Sprocket Thrust Washer
2 Drive Sprocket Thrust Washer
3 Install Drive Link Assembly
Note

Install as an assembly.


4 A/Trans Fluid Pump Assembly
Note

Rotating the drive sprocket and link assembly while installing the oil pump will aid in aligning the driven sprocket and oil pump drive shaft splines.


5 A/Trans Fluid Pump Bolt M6 x 25 (Qty: 3) Refer to Fastener Caution .

Procedure:

Tighten in sequence shown.

Tighten

12 Nm (106 lb in).


Transfer Drive Gear Assembly Installation


Transfer Drive Gear Assembly Installation

Callout Component Name
1 Drive Sprocket Thrust Washer
2 Front Differential Transfer Drive Gear Support Assembly
3 Front Differential Transfer Drive Gear Support Bolt M8 x 25 (Qty: 9) Refer to Fastener Caution .

Procedure

Tighten in sequence shown.

Tighten

10 Nm (89 lb in) plus 50 degrees ± 4 degrees.

Special Tools:

EN 45059 Angle Meter
For equivalent regional tools, refer to Special Tools .
4 Front Differential Carrier Baffle
5 Front Differential Carrier Baffle Bolt M6 x 25

Tighten

12 Nm (106 lb in).