Torque Converter Installation
|
Torque Converter Installation
|
Callout
|
Component Name
|
1
|
Torque Converter Assembly
Warning
|
Lower the torque converter straight down. Failure to lower the torque converter straight down could damage the torque converter clutch lip seal inside the torque converter clutch assembly.
|
|
|
|
|
Special Tools
DT 46409
Torque Converter Lifting Handles
For equivalent regional tools, refer to
Special Tools
.
|
2
|
DT 21366
Converter Holding Strap
Warning
|
The torque converter must be held to the torque converter housing by a retaining device such as shipping brackets. Without the retaining device, the torque converter may slide forward, disengaging the oil pump, or may fall completely out of the transmission causing personal injury and/or property damage.
|
|
|
|
|
|
3
|
Dust Cover, model dependent
|
4
|
Dust Cover Push Pin - Model Dependant (Qty: 2)
|
5
|
Dust Cover Bolt - Model Dependant
Refer to
Fastener Caution
.
Tighten
75 Nm (37 lb ft)
|