SAAB WIS ONLINE

Transmission Mount Bracket Replacement - Rear

Transmission Mount Bracket Replacement - Rear

Removal Procedure


1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

2. Remove the left tire and wheel. Refer to Tire and Wheel Removal and Installation .

3. Using a suitable jack stand, support the rear of the powertrain.

4. Remove the transmission mount to bracket through bolt (1).


5. Remove the transaxle brace bolt (1), then loosen bolt (2) until it no longer engages the transaxle.


6. Remove the transaxle brace (3) with bolt (2) still retained in the brace.

7. Remove the transmission mount to transmission bolts (2).


8. Remove the rear mount to frame fasteners (1, 2), then remove the mount and bracket from the vehicle.



Installation Procedure


1. Refer to Fastener Caution .

Install the transmission mount bracket to transmission bolts (2) and tighten to 100 Nm (74 lb ft) .


2. Install the transaxle brace (3) with bolt (2) seated in the brace.


3. Install the transaxle brace bolt (1) and tighten to 50 Nm (37 lb ft) .

4. Tighten the brace bolt (2) to 100 Nm (74 lb ft) .

5. Install the transmission mount bracket to transmission bolt (1) and tighten to 100 Nm (74 lb ft) .


6. Install the rear mount to frame fasteners (1, 2) and tighten to 110 Nm (81 lb ft) .


7. Remove the jack stand.

8. Install the left tire and wheel. Refer to Tire and Wheel Removal and Installation .

9. Lower the vehicle.