Control Solenoid Valve and Transmission Control Module Assembly Inspection
|
Control Solenoid Valve and Transmission Control Module Assembly Inspection
|
1.
|
Inspect the control solenoid valve assembly connectors and pins (1, 2, 4, 6) for the following conditions:
|
2.
|
Ensure no metallic debris is inside the connectors near the terminal pins.
|
3.
|
Inspect the control solenoid valve assembly solenoid leads (3) for contamination or metallic debris.
|
4.
|
Inspect the 4 control solenoid valve assembly filter plate retaining tabs (5) for cracks and ensure proper tension when filter plate is attached.
|