|
Checks
|
Causes
|
|
Case Assembly (51)
|
|
•
|
Inspect for cracked or broken Case (51)
|
|
•
|
Inspect for stripped or sheared splines
|
|
•
|
Inspect for missing Lube Orifice Plug
|
|
•
|
Inspect for binding Manual Shift Detent Lever Assembly (511)
|
|
•
|
Inspect for missing Manual Shift Shaft Pin (510)
|
|
•
|
Inspect for interference or binding Park Pawl Actuator Assembly (509)
|
|
•
|
Inspect for disengaged or broken 1-2-3-4 Clutch Piston Spring Retainer (459)
|
|
|
Torque Converter
|
|
•
|
Inspect for stripped or sheared splines on Turbine Shaft
|
|
•
|
Inspect for missing bolts from Torque Converter to Flywheel
|
|
|
35R/456 Housing Assembly
|
|
•
|
Inspect for damaged or broken Input Shaft Thrust Bearing Assembly (32)
|
|
•
|
Inspect for stripped, sheared or loose splines on the Input Shaft to the 3-5 Reverse/4-5-6 Clutch Housing (422)
|
|
|
Oil Pump Assembly
|
|
•
|
Inspect for fluid leaks / improper fluid level
|
|
•
|
Inspect for disengaged, worn, binding or failed Drive Sprocket (216), Driven Sprocket (215) or Drive Link (217)
|
|
•
|
Inspect for leaking Fluid Outlet Seal Assembly (57)
|
|
•
|
Inspect for damaged or worn Drive (219, 220) and Driven Sprocket Thrust Washers (214)
|
|
•
|
Inspect for loose or missing Oil Pump Bolts (204)
|
|
•
|
Inspect for stripped or sheared splines on the Oil Pump Shaft or Driven Sprocket (215)
|
|
•
|
Inspect for damaged, clogged or improperly installed Oil Filter Assembly (201)
|
|
•
|
Inspect for damaged or leaking Oil Filter Neck Seal (202)
|
|
|
Low & Reverse Clutch Assembly (455)
|
Inspect for stripped or sheared splines to the Reaction Carrier (467)
|
|
Input Carrier Assembly (470)
|
|
•
|
Inspect for stripped or sheared splines to ring gear
|
|
•
|
Inspect for improperly installed carrier pinion gear pins
|
|
