No Fourth, Fifth, and Sixth Gear
|
No Fourth, Fifth, and Sixth Gear
|
Checks
|
Causes
|
4-5-6 Clutch Assembly
|
•
|
Inspect for damaged or broken 4-5-6 clutch piston (433) and piston seals (430-432).
|
•
|
Inspect for broken or disengaged 4-5-6 backing plate retainer (442).
|
•
|
Inspect for damaged or broken 4-5-6 clutch dam piston (435) and piston seals damaged, worn or delaminating.
|
•
|
Inspect for broken or disengaged 4-5-6 clutch dam retainer (436).
|
•
|
Inspect for sheared or stripped splines on the reaction carrier hub (438).
|
•
|
Inspect for sheared or stripped splines on 3-5-rev/4-5-6 housing to turbine shaft (422).
|
•
|
Inspect for loose, worn or damaged 3-5-rev/4-5-6 housing bushing.
|
•
|
Inspect for broken, porous or improper surface finish or plugged oil passages of the 3-5-rev/4-5-6 housing (422).
|
•
|
Inspect for failure of the Input shaft thrust bearing (32).
|
•
|
Inspect for damaged, stripped or sheared splines on 4-5-6 clutch plates (439-441).
|
•
|
Inspect for broken or fatigued 4-5-6 clutch piston return spring (434).
|
|