SAAB WIS ONLINE

Automatic Transmission Range Selector Lever Replacement

Automatic Transmission Range Selector Lever Replacement



Callout Component Name

Preliminary Procedures

1. Remove the battery tray. Refer to Battery Tray Replacement .

2. Ensure that the shift control range select lever is in the park (P) position.

3. Disconnect the shift control cable from the transaxle range switch lever.

4. Depress the shift control cable retainer clip tabs and remove the shift control cable from the shift control cable bracket.


1 Automatic Transmission Range Selector Lever Fastener
Warning

Hold the transmission range selector lever while removing or installing the lever retaining nut. Failure to hold the lever can cause damage to the transmission internal park system components which could allow the vehicle to roll when placed in the park position.


Refer to Fastener Caution .

Tighten

15 Nm (11 lb ft)
2 Automatic Transmission Range Selector Lever Washer
3 Automatic Transmission Range Selector Lever