Control Lever Knob Replacement
|
Control Lever Knob Replacement
|
Callout
|
Component Name
|
1
|
Shift Control Knob Bezel
Note
|
•
|
Removal: Carefully insert a small flat-bladed tool between the bezel (1) and the shift knob (3). Apply careful downward pressure to the bezel to separate the bezel from the shift knob. The bezel will drop down approximately 13.0 mm (0.5 in) exposing the spring clip (2).
|
•
|
Installation: Lift the bezel (1) up to the shift knob (3) until a click sound is heard indicating the bezel is secured to the shift knob.
|
|
2
|
Shift Control Knob Spring Clip
Note
|
Place the shift control in the Drive position, then remove the spring clip from the front of the shift knob.
|
|
3
|
Shift Control Knob
|