Brake Pedal Pushrod Inspection
|
Brake Pedal Pushrod Inspection
|
1.
|
Disconnect the brake pedal pushrod (1) from the brake pedal.
|
2.
|
Inspect the brake pedal pushrod eyelet bushing (2), if equipped, for cracks and/or excessive wear.
|
3.
|
Reposition the pedal pushrod boot (3) toward the front of the vehicle to expose as much of the pedal pushrod (1) as possible.
|
4.
|
Inspect the brake pedal pushrod (1) for straightness.
|
5.
|
If the brake pedal pushrod eyelet bushing (2) exhibited cracks and/or excessive wear, then the bushing requires replacement.
|
6.
|
If the brake pedal pushrod (1) is not straight, then the pushrod requires replacement.
|
7.
|
Return the pedal pushrod boot (3) to its original position on the pedal pushrod (1).
|
8.
|
Connect the brake pedal pushrod (1) to the brake pedal.
|