Parking Brake Rear Cable Replacement - Right Side (FWD)
Parking Brake Rear Cable Replacement - Right Side (FWD) |
Special Tools
CH-37043 Parking Brake Cable Release ToolFor equivalent regional tools, refer to Special Tools .
Removal Procedure |
Refer to Brake Dust Warning .
1. |
Disable the parking brake cable adjuster. Refer to
Parking Brake Cable Adjuster Disabling
.
|
2. |
Turn the ignition to the OFF position.
|
3. |
Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
|
4. |
Remove the tire and wheel assembly. Refer to
Tire and Wheel Removal and Installation
.
|
5. |
Remove the parking brake shoes. Refer to
Parking Brake Shoe Replacement
.
|
6. |
Disconnect the right parking brake cable fitting from the parking brake intermediate cable connector.
|
7. |
Using the
CH-37043
Parking Brake Cable Release Tool , compress the locking tabs on the right parking brake cable conduit (1) and remove the cable from the rear frame bracket.
|
8. |
Remove the left parking brake actuator assembly spring clip (1).
|
9. |
Press the parking brake actuator arm inward and release the parking brake rear cable fitting from the actuator.
|
11. |
Remove the parking brake rear cable.
|
Installation Procedure |
1. |
Insert the parking brake rear cable (1) into the rear suspension knuckle. |
2. |
Ensure the parking brake rear cable is inserted fully into the rear suspension knuckle.
|
3. |
Press the parking brake actuator arm inward and install the parking brake rear cable to from the actuator.
|
4. |
Install the left parking brake actuator assembly spring clip (1).
|
5. |
Install the parking brake rear cable and conduit (1) to the rear frame bracket.
|
6. |
Ensure the parking brake rear cable conduit locking tabs are fully engaged to the rear frame bracket.
|
7. |
Connect the right parking brake cable fitting to the parking brake intermediate cable connector.
|
8. |
Install the parking brake shoes. Refer to
Parking Brake Shoe Replacement
.
|
9. |
Install the tire and wheel assembly. Refer to
Tire and Wheel Removal and Installation
.
|
10. |
Enable the parking brake cable adjuster. Refer to
Parking Brake Cable Adjuster Disabling
.
|