SAAB WIS ONLINE

Brake Pressure Modulator Valve Bracket Replacement

Brake Pressure Modulator Valve Bracket Replacement

Removal Procedure


1. Place the ignition switch in the OFF position.

2. Without draining the coolant or removing the hoses, remove and position aside the radiator surge tank. Refer to Radiator Surge Tank Replacement (LAU) Radiator Surge Tank Replacement (LF1) .

3. Remove the brake pressure modulator valve (BPMV) assembly. Refer to Brake Pressure Modulator Valve Replacement .

4. Remove the BPMV bracket bolts (1).


5. Remove the BPMV bracket (1).


6. Inspect the bracket insulators for damage and replace, if necessary.


Installation Procedure


1. Install the BPMV bracket (1).


2. Refer to Fastener Caution .

Install the BPMV bracket bolts (1) and tighten to 12 Nm (106 lb in) .


3. Fit the BPMV unit. Refer to Brake Pressure Modulator Valve Replacement .

4. Install the radiator surge tank. Refer to Radiator Surge Tank Replacement (LAU) Radiator Surge Tank Replacement (LF1) .