Suspension Strut and Shock Absorber Testing - On Vehicle
|
Suspension Strut and Shock Absorber Testing - On Vehicle
|
Step
|
Action
|
Yes
|
No
|
1
|
Did you review the General Description and perform the necessary inspections?
|
Go to
Step 2
|
Go to
Symptoms - Suspension General Diagnosis
|
2
|
Verify that the customer's concern is present.
Does the vehicle operate normally?
|
System OK
|
Go to
Step 3
|
3
|
Important
|
A light film of oil on the top portion of the shock reservoir is normal.
|
|
Inspect each strut or shock absorber for external fluid leakage.
Is a strut or shock absorber leaking?
|
Go to
Step 5
|
Go to
Step 4
|
4
|
1.
|
Use your hands in order to lift up and push down each corner of the vehicle 3 times.
|
2.
|
Remove your hands from the vehicle.
|
3.
|
Locate a shock or strut that exceeds 2 cycles.
|
Did you locate shock or strut that exceeds 2 cycles?
|
Go to
Step 5
|
Go to
Step 6
|
5
|
Important
|
Inspect the vehicle trim height in order to correct any possible causes of shock/strut failures. Refer to
Trim height inspection
.
|
|
Replace the strut or shock absorber. Refer to
Strut, Strut Component, or Spring Replacement
or
Shock Absorber Replacement
.
Did you complete the repair?
|
Go to
Step 6
|
-
|
6
|
Drive the vehicle in order to verify the repair.
Did you correct the condition?
|
System OK
|
Go to
Step 3
|