SAAB WIS ONLINE

Rear Suspension Link Replacement - Upper to Lower Control Arm

Rear Suspension Link Replacement - Upper to Lower Control Arm



Callout Component Name

Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .


1 Rear Suspension Upper Control Arm Nut
2 Rear Suspension Upper Control Arm Bolt Refer to Fastener Caution .

Tighten

150 Nm (110 lb ft) plus an additional 90 degrees
3 Rear Suspension Lower Control Arm Nut
4 Rear Suspension Lower Control Arm Bolt

Tighten

40 Nm plus an additional 90 degrees (66 lb ft) plus an additional 90 degrees
5 Rear Suspension Link