SAAB WIS ONLINE

Stabilizer Shaft Insulator Replacement

Stabilizer Shaft Insulator Replacement



Callout Component Name

Preliminary Procedures

1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .

2. Remove the rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .


1 Stabilizer Shaft Insulator Bolt (Qty:2) Refer to Fastener Caution .
Note

DO NOT re-use the old bolts, replace with NEW only.


Tighten

22 Nm (16 lb ft)
2 Stabilizer Shaft Bracket
3 Stabilizer Shaft Insulator
Note

Ensure that the insulator is installed with the split facing down.