SAAB WIS ONLINE

Rear Camber Adjustment

Rear Camber Adjustment



1. Loosen the adjuster cam nut (1).


2. Using a wrench to rotate the adjuster bolt (2), adjust the cam (3) to specifications.

3.
Note

Ensure that the camber settings have not changed after torquing the adjuster nut to specifications. Readjust if necessary.


Refer to Fastener Caution .

Using a wrench to hold the adjuster bolt (2), tighten the adjuster nut (1) to 70 Nm (52 lb ft). .

4. Check the toe alignment and adjust if required. Refer to Rear Toe Adjustment .

5. Road test the vehicle.