SAAB WIS ONLINE

Replacement Wheels Description

Replacement Wheels Description


Warning

Do Not use flat mount wheels on dual ring type wheel applications. The use of flat mount wheels on a dual ring application may cause the wheel to loosen and could cause loss of vehicle control resulting in personal injury.


Replace the wheel if any of the following conditions exist:


The wheel exhibits excessive runout.

The wheel is bent.

The wheel is cracked.

The wheel is severely corroded.

Note

Air leaks caused by porosity on aluminum wheels are repairable.


The wheel leaks air.

Warning

If you are replacing the wheel(s), the wheel stud(s), the wheel nut(s) or the wheel bolt(s), install only new GM original equipment parts. Installation of used parts or non-GM original equipment parts may cause the wheel to loosen, loss of tire air pressure, poor vehicle handling and loss of vehicle control resulting in personal injury.



Warning

The use of non-GM original equipment wheels may cause:

Damage to the wheel bearing, the wheel fasteners and the wheel

Tire damage caused by the modified clearance to the adjacent vehicle components

Adverse vehicle steering stability caused by the modified scrub radius

Damage to the vehicle caused by the modified ground clearance

Speedometer and odometer inaccuracy


Replace the wheel, the wheel studs and the wheel/nuts, or the wheel bolts if applicable, if any of the following conditions exist:


The wheel has elongated bolt holes.

The wheel/nuts, or bolts if applicable, loosen repeatedly.


Aluminum wheel identification is cast into the inboard side of the wheel.