SAAB WIS ONLINE

Mode Control Cam Actuator Replacement

Mode Control Cam Actuator Replacement



Callout Component Name

Preliminary Procedures

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .

2. Remove LH floor air outlet duct. Refer to Floor Rear Air Outlet Duct Replacement - Left Side .

3. Loosen the brake pedal bracket. Fit the fastener and move the brake pedal bracket so that they fit against the cam position sensor cover's screws. See Brake Pedal Assembly, Replacement .


1 Mode Cam Actuator Cover Screw (Qty: 1) Refer to Fastener Caution .

Procedure

Disconnect the mode actuator electrical connector.

Tighten

1.5 Nm (13 lb in)
2 Mode Cam Actuator Cover.
3 Mode Cam Actuator Gears
4 Mode Cam Actuator Screw (Qty: 2)

Tighten

1.5 Nm (13 lb in)
5 Mode Cam Actuator
Note

Actuator is self-calibrating when connecting the battery.