Fastener Tightening Specifications

/ 9-4x / 2011 / 8. Body / Body / Technical data / Fastener Tightening Specifications

Application	Specification
	Metric	English
Frame-to-Body Bolts
• First Pass	100 Nm	74 lb ft
• Final Pass	plus 90 Degrees
Frame-to-Body Reinforcement Bolts
• First Pass	45 Nm	33 lb ft
• Final Pass	plus 30 degrees
Front Transmission Mount-to-Frame Bolt	100 Nm	74 lb ft
Front Wheelhouse Liner - Front Screws	6 Nm	53 lb in
Front Wheelhouse Liner Screws	3 Nm	27 lb in
Lower Ball Joint Fastener
• First Pass	30 Nm	22 lb ft
• Final Pass	plus 130 degrees
Rear Transmission Mount-to-Frame Bolt
• First Pass	100 Nm	74 lb ft
• Final Pass	plus 90 Degrees
Rear Support to Body Bolts
• First Pass	100 Nm	74 lb ft
• Final Pass	plus 90 Degrees
Rear Wheelhouse Panel Liner Nuts	3 Nm	27 lb in
Rear Wheelhouse Panel Liner Screws	3 Nm	27 lb in
Reinforcements Arm Bolts
• First Pass	150 Nm	111 lb ft
• Final Pass	plus 30 degrees
Stabilizer Shaft Clamp Fasteners	45 Nm	33 lb ft
Steering Gear Bolt
• First Pass	60 Nm	44 lb ft
• Final Pass	plus 120 Degrees

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.