Noise Diagnosis - Blower Motor
|
Noise Diagnosis - Blower Motor
|
Step
|
Action
|
Yes
|
No
|
DEFINITION: Noise originating from the blower motor.
|
1
|
Were you sent here from Symptoms or another diagnostic table?
|
Go to
Step 2
|
Go to
|
2
|
Inspect the air inlet grille for debris.
Is debris present?
|
Go to
Step 8
|
Go to
Step 3
|
3
|
1.
|
Sit inside the vehicle.
|
2.
|
Close the vehicle doors and windows.
|
3.
|
Turn ON the ignition, with the engine OFF.
|
4.
|
Cycle the blower motor through all of the speeds and modes in order to determine where and when the noise occurs.
|
Is a noise evident during the blower operation?
|
Go to
Step 4
|
Go to
Step 11
|
4
|
Inspect for excessive vibration at each blower motor speed by feeling the blower case.
Is excess vibration present?
|
Go to
Step 6
|
Go to
Step 5
|
5
|
Listen to the blower motor at each speed.
Is the blower motor making a squeaking or chirping noise?
|
Go to
Step 9
|
Go to
Step 11
|
6
|
2.
|
Inspect the blower motor impeller for deposits of foreign material.
|
3.
|
Inspect the blower motor for deposits of foreign material.
|
Did you find any foreign material on the blower motor or blower motor impeller?
|
Go to
Step 8
|
Go to
Step 7
|
7
|
Inspect the blower motor for the following conditions:
•
|
A loose impeller retainer
|
•
|
Improper impeller alignment
|
Did you find any of these conditions?
|
Go to
Step 9
|
Go to
Step 10
|
8
|
Remove the foreign material.
Is the action complete?
|
Go to
Step 10
|
-
|
9
|
Replace the blower motor. Refer to
Blower Motor Replacement
.
Is the repair complete?
|
Go to
Step 11
|
-
|
10
|
Install the blower motor. Refer to
Blower Motor Replacement
.
Is the action complete?
|
Go to
Step 11
|
-
|
11
|
Operate the system in order to verify the repair.
Did you find and correct the condition?
|
System OK
|
Go to
Step 2
|