Front Side Door Lock Cover Replacement

/ 9-4x / 2011 / 8. Body / Doors and locks / Adjustment/replacement / Front Side Door Lock Cover Replacement

Removal Procedure

1.	Place the window in the full up position.

2.	Remove the front side door trim panel. Refer to Front Side Door Trim Replacement .

3.	Remove the front side door water deflector.

4.	Remove the wiring harness from the retainers (1).

5.	Disconnect the electrical connector (2).

6.	Remove the screw cover (3).

7.	Remove the screws (4) from the outer edge of the door and from the inside.

8.	Remove the front side door lock cover (5) from inside the door.

Installation Procedure

1.	Install the front side door lock cover (5) to cover the lock.

2.	Refer to Fastener Caution . Install the screws (4) to the outer edge of the door and to the inside and tighten to 5 Nm (44 lb in) .

3.	Install the screw cover (3).

4.	Connect the electrical connector (2).

5.	Install the wiring harness to the retainers (1).

6.	Inspect the door locking system for proper operation before installing the trim panel.

7.	Install the front side door water deflector.

8.	Install the front side door trim panel. Refer to Front Side Door Trim Replacement .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.