SAAB WIS ONLINE

Front Side Door Outside Handle Replacement

Front Side Door Outside Handle Replacement



Callout Component Name
1 Front Side Door Access Hole Plug

Procedure

1. Do Not remove the front inside door trim panel to access door lock cylinder clamp screw.

2. Use a suitable tool, remove the access hole plug located on the inside opening of the door that conceals the screw for the lock cylinder clamp.


2 Front Side Door Lock Cylinder Clamp Screw Refer to Fastener Caution .

Procedure

1. The screw for the lock cylinder clamp will not come out completely.

2. The lock cylinder clamp screw must be unscrewed to a hard stop before the lock cylinder and opening cover can be removed.


Tighten

5 Nm (44 lb in)
3 Front Side Door Lock Cylinder Opening Cover

Procedure

Pull the lock cylinder out of the handle to remove the lock cylinder opening cover.
Note

The door lock cylinder opening cover clips over the lock cylinder.


4 Front Side Door Lock Cylinder

Procedure

Inspect the door lock system for proper operation.
Note

When reinstalling the lock cylinder ensure the gasket is in align with the cylinder.