SAAB WIS ONLINE

Liftgate Latch Striker Replacement

Liftgate Latch Striker Replacement



Callout Component Name

Preliminary Procedures

Remove the rear end trim finish panel. Refer to Rear End Trim Finish Panel Replacement .
1 Liftgate Latch Striker Bolt (Qty: 2) Refer to Fastener Caution .

Tighten

25 Nm (18 lb ft)
2 Liftgate Latch Striker

Procedure

1. Mark the location of the striker with a grease pencil to ensure proper alignment during installation.

2. Adjust the liftgate if needed.