Front Bumper Fascia Replacement
|
Front Bumper Fascia Replacement
|
Callout
|
Component Name
|
Preliminary Procedures
|
1
|
Front Bumper Fascia Bolt (Qty: 2)
Refer to
Fastener Caution
.
Tighten
10 Nm (89 lb in)
|
2
|
Front Fender Support Bracket Bolt (Qty: 6)
Tighten
7 Nm (62 lb in)
|
3
|
Front Bumper Fascia
Procedure
1.
|
Carefully push a small nylon wedge between the fascia and the bracket. Insert a small flat-bladed tool into the fascia slot and depress the snaps one at a time and pull on the fascia at the same time to gradually remove the fascia from the bracket.
|
2.
|
Carefully release the retainers from the base of the headlamp.
|
3.
|
Disconnect the headlamp washer hose and retainers.
|
4.
|
Disconnect the electrical connector.
|
5.
|
Transfer parts as needed.
|
|