SAAB WIS ONLINE

Liftgate Center Applique Replacement

Liftgate Center Applique Replacement



Callout Component Name

Preliminary Procedures

1. Remove the liftgate lower trim panel. Refer to Liftgate Lower Trim Finish Panel Replacement .

2.
Warning

When working with any type of glass or sheet metal with exposed or rough edges, wear approved safety glasses and gloves in order to reduce the chance of personal injury.


Disconnect the electrical harness to the liftgate center applique.


1 Liftgate Center Applique Screw Cover (Qty: 2)

Procedure

Using a small flat-bladed tool, release the screw covers from the rear applique.
2 Liftgate Center Applique Screw (Qty: 2) Refer to Fastener Caution .
3 Liftgate Center Applique Nut (Qty: 4)

Tighten

4 Nm(35 lb in)
4 Liftgate Center Applique Assembly

Procedure

1. Release the two retainers securing the liftgate center applique to the liftgate lower outer panel.

2. Release the electrical harness grommet from the outer panel.

3. Remove the liftgate center applique assembly.

4. Transfer the rear license plate lamps.

5. Transfer the liftgate release switch.

6. Transfer the rearview camera, (if equipped). Refer to Rearview Camera Replacement .