Liftgate Side Applique Replacement
|
Liftgate Side Applique Replacement
|
Callout
|
Component Name
|
Preliminary Procedures
Remove the rear end spoiler. Refer to
Rear End Spoiler Replacement
.
|
1
|
Bolt
Refer to
Fastener Caution
.
|
2
|
Acorn Nut (Qty: 3)
Note
|
Hand tighten the nuts.
|
|
3
|
Plastic Retainer (Qty: 4)
|
4
|
Liftgate Side Upper Finish Molding
Procedure
1.
|
Using a trim-type release tool, release the four plastic retailers from the rear liftgate.
|
2.
|
Lift the side upper finish molding from the liftgate and release the adhesive tape.
|
3.
|
Clean the adhesive tape with a plastic flat-bladed tool and the residue from the liftgate using a 50/50 mixture by volume of clean drinkable water and isopropyl alcohol.
|
4.
|
Dry the liftgate area thoroughly where the new liftgate side upper finish molding will attach.
|
|