SAAB WIS ONLINE

Roof Panel Molding Replacement (With V64)

Roof Panel Molding Replacement (With V64)



Callout Component Name

Preliminary Procedures

Remove one side of the luggage carrier side rail. Refer to Luggage Carrier Side Rail Replacement .
1 Roof Panel Molding

Procedure

1. Lift the forward and rear edge of the roof panel molding from the retention clip in the roof ditch.

2. Release the molding from the full length of the roof ditch.

3. Clean the roof ditch with a 50/50 mixture by volume of clean drinkable water and isopropyl alcohol.

4. Ensure the roof ditch is clean and dry.

5. Position the forward edge of the roof panel molding into the retainer clip and the front edge at the upper windshield.

6. Using a roller-type tool, secure the roof panel molding into the roof ditch. Work from the front to the rear and ensure that the rear retaining clip is securely fastened.

7. Install the luggage carrier side rail. Refer to Luggage Carrier Side Rail Replacement .