SAAB WIS ONLINE

Front Side Door Window Belt Reveal Molding Replacement

Front Side Door Window Belt Reveal Molding Replacement



Callout Component Name

Preliminary Procedures

1. Remove the front side door trim panel. Refer to Front Side Door Trim Replacement

2. Remove the outside rearview mirror. Refer to Outside Rearview Mirror Replacement


1 Front Side Door Window Belt Reveal Molding Screw Refer to Fastener, Caution
Note

The screw is located in the lower rear of the door frame.


Tighten

1.5 Nm (13 lb in)
2 Front Side Door Window Belt Reveal Molding

Procedure

1. Remove the belt reveal molding by lifting up on the front of the seal and working rearward.

2. When re-installing the belt reveal molding, align the fastener with the locating hole in the door frame.