SAAB WIS ONLINE

Front Side Door Window Regulator Replacement

Front Side Door Window Regulator Replacement



Callout Component Name

Preliminary Procedures

Remove the front side door trim panel. Refer to Front Side Door Trim Replacement
1 Front Side Door Window Regulator Guide Nuts to Window (Qty: 2) Refer to Fastener, Caution

Procedure

Remove the front side door water deflector.

Tighten

11 Nm (98 lb in)
2 Front Side Door Window Regulator Bolts (Qty: 5)

Procedure

1. Position window to access the front side door window regulator guide bolts.

Loosen the nuts on the window regulator guide.

2. Raise the window to the fully up position, tape in place.


Tighten

10 Nm (89 lb in)
3 Front Side Door Window Regulator

Procedure

1. Disconnect the electrical connector from the motor.

2. When installing a new window regulator, remove the two window regulator guides bolts.

3. The window regulator guides must be raised to meet the window before installing the window regulator guides bolts.